Description: Product selling points:1. Adopt industrial grade main control chip2. Large LCD display, adjustable charging and discharging parameters3. Complete 3-stage PWM charging management4. Built-in overcurrent/short circuit protection, open circuit protection, reverse connection protection, are self-recovery type, do not damage the controller5. Dual MOS anti-backup circuit, ultra-low heat generation.Product Parameter:Rated voltage: 10A-30A Current: 10ARated current: 40A-60A Current: 30AMaximum photovoltaic voltage: Maximum 23V for 12V battery; Maximum 46V for 24V battery.Full cut-off voltage: 14.4V (default, adjustable)Discharge cut-off voltage: 10.7V (default value, adjustable)Discharge recovery voltage: 12.6V (default value, adjustable)Charge recovery voltage: 13.2V .Light-controlled switch-on threshold: PV panel 8V (light-controlled switch-on with delay)Light control switch-off valve: light control switch-off valveUSB output: 2-channel USB output, 5V/2.5A (maximum)Standby current: <1 0mAOperating temperature: -35~ +60CSize/Weight: 133.5* 70* 35mm 1 1 65gInstruction manual1.This controller is 12V/24V auto adaptive, when installing for the first time, please make sure the battery has enough voltage so that the controller can recognise it as the correct battery type.Pake the controller to be installed as close as possible to the battery, in order to avoid voltage drop caused by long wires, which will affect the normal voltage judgement.3. This controller is only applicable to all kinds of lead-acid batteries (including open, sealed, gel, etc.), please do not use in other batteries (including lithium batteries, nickel-metal hydride batteries, etc.)4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source.6. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface.Menu key: used to switch the parameter interface, or long press for 5 seconds to enter or exit the parameter setting.Up: In the parameter setting interface, press lightly once to make the parameter up. Up: In the parameter setting interface, press once lightly to make the parameter up one step.Down: In the parameter setting interface, press once to make the parameter go up or down one step.System Link1. Connect the positive and negative terminals of the battery to the controller as shown in the diagram, the controller will automatically detect the battery voltage.2. Connect the positive and negative terminals of the load to the controller as shown in the diagram, and be careful not to connect them in reverse.3.Connect the solar panel to the controller as shown in the picture.Note: 12V battery with 1 8V solar panel, 24V battery with 36V solar panel.List:Solar controller X1
Price: 6.95 USD
Location: Brownwood, Texas
End Time: 2024-07-11T04:44:39.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Unbranded
Current Output: 30-39 A
Type: Solar Controller
Current Type: DC
Power Source: Solar
Color: Blue
Recommended Environment: Indoor/Outdoor
Features: LCD Display
Charging Mode: PWM (Pulse Width Modulation)
Application: Commercial, Home/Garden
