6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F

Description: 6009 Epoxy Floor Coating Industrial & Commercial Low Temp 35°F | 100% Solids | Quick Cure 6009 Epoxy Concrete Floor Coating is 100% Solids 6009 epoxy floor coating is an attractive all purpose low temperature, high build commercial grade epoxy designed to be extremely tough, durable impact and abrasion resistant with very good chemical resistance to corrosive waters and other chemicals. It is a 100% solids, 2:1 ratio plural component, self priming, no VOC, extremely tough advanced polymer structure. With a quick 4 hour recoat time, can be used as part of a same day floor coating system. The 6009 is used to protect garage, show room, industrial floors, and general work areas. Can be applied up to 32 mils thick (50 sq'/gallon) down to 35°F and rising (note: cold temps will significantly extend recoat and back in-service times. Coverage rate for 6009 depends on how thick applied. At 100% solids, nothing lost to evaporation after it dries (compare to 50% solids epoxy at big box stores which lose 1/2 of material in container to evaporation). For garage floors recommended 10 mils minimum (160 sq'/gallon) epoxy basecoat thickness. One 3 gallon kit of 6009 protects most 2 car garages, covering 480 sq’ at 10 mils thick in a one coat application (applied at 160 sq'/gallon). For additional abrasion and chemical protection, recommend our 5500 Polyaspartic as a clear, high gloss, UV resistant protective topcoat. One 2 gallon kit of 5500 Polyaspartic Clear is all you need as a topcoat for a 480 sq', 2 car garage. When applying chips/flakes can apply them to the colored 6009 basecoat and then topcoat with a clear version of either the 6009 or 5500. Using a clear topcoat over a colored basecoat also adds depth to the visual appearance and enhances the look. The 6009 can also be used as an effective outdoor concrete patch repair. Mix with sand, 2 parts sand + 1 part 6009 and when applied it will meet or exceed strength of surrounding concrete. One 3 gallon kit of 6009 mixed with sand will fill 1,410 cubic inches (23,100 cubic cm) of a hole or crack. Comes in high gloss clear or 6 color options in 3 gallon & 15 gallon kits. See How to Apply tab for application instructions. PRIMER: Optional. When needed recommend the 5015 Water Based Epoxy Primer available in 20 colors to easily match color of your topcoat. For quick one day application consider the very fast curing 7001 Moisture Cured Polyurethane Primer (recoat at 70F in 1 to 2 hours). For applying directly to VCT, ceramic tile, vinyl, linoleum or asbestos mastics, cutback and carpet glues with minimal preparation consider our Perfect Primer Sealer . TOPCOAT: Optional: For additional abrasion and chemical protection, recommend our 5500 Polyaspartic as a clear, high gloss, UV resistant protective topcoat. Where is 6009 typically used? Industrial floors Warehouse floors Show room floors Garage floors Basements General work areas Why 6009 Epoxy Floor Coating? Protective and attractive color coat epoxy flooring system Designed to seal floors against abrasion, water, oils and chemicals Good Color stability Wide application temperature range 35°F to 125°F (1.7°C to 52°C) Quick re-coat time 4-5 hours (at 75°F) Self Priming With No Primer Required 100% solids, 2 part, no VOC, low odor Excellent protective coating at low cost per Mil DFT (dry film thickness) Available in 6 colors. TECHNICAL DETAILS Solids 100% Color Black, Dark Gray, Light Gray, Tan, white, clear Hardness Shore DIN 53505 D 70 Working time 20 min at 70°F Recoat Time 4-5 hours at 75°F. Varies with temperature & humidity Solids 100% Mix ratio 2:1 Application method Notched trowel or squegee, roller Surfaces Applied to Concrete, metal, wood Solids 100% Hardness Shore DIN 53505 D 70 Application Temperature 35°F to 125°F (air and surface) and 5°F above dew point Tensile Strenghth (GPa) 52 Flexural Strength (MPa) 94 Carbamation Test (scale 1 to 5) 5 Viscosity @75°F cps 350-600 Concrete cure time Minimum 28 days after new pour Color Size Price White 3 Gallon Kit 316.25 White 15 Gallon Kit 1,489.25 Black PART A ONLY (1 GALLON) 132.25 Clear PART B ONLY (1 GALLON) 132.25 Dark Gray PART A ONLY (1 GALLON) 132.25 Light Gray PART A ONLY (1 GALLON) 132.25 Wheat (Light Tan) PART A ONLY (1 GALLON) 132.25 Clear PART A ONLY (1 GALLON) 132.25 Wheat (Light Tan) 3 Gallon Kit 316.25 Black 3 Gallon Kit 316.25 Light Gray 3 Gallon Kit 316.25 Dark Gray 3 Gallon Kit 316.25 Clear 3 Gallon Kit 316.25 Shipping Shipping cost:No cost shipping lower 48 US States FedEx Ground Delivery time:Typically 3-5 days to process order plus 1 to 5 days transit time after shipment depending on location Payment We accept the following payment methods: PayPal payment due at time of order placement Please contact us if you have any questions. Service PLEASE CONTACT CUSTOMER SERVICE FOR QUESTIONS

Price: 299.99 USD

Location: Santa Ana, California

End Time: 2023-08-30T18:20:18.000Z

Shipping Cost: 0 USD