Muscle Milk

Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21

Description: The Following Items Are Included: Anritsu Site Master S331E w/ Options: (BC# 38542-L/T*) Option 10: Bias Tee Option 21: 2-Port Transmission Measurements BNC Cable Stylus DC Car Charger AC Adapter/Charger Power Cord USB PC Interface Cable User Manual On CD-ROM Anritsu Software Tool Box V1.04 Carrying Case w/ Strap BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Anritsu SiteMaster S331E Cable & Antenna Analyzer ( Handheld ) 2MHz - 4.0GHzInstalled Options:- Option 10: Bias Tee- Option 21: 2-Port Transmission MeasurementsThis Unit Has A Color Touchscreen LCD Display!Includes Carrying Case & Accessories As Listed Above!       Working Condition: ExcellentCondition: RefurbishedCalibrated: YesWarranty: 1 YEAR WARRANTY     Anritsu introduces its eighth generation compact handheld Cable and Antenna Analyzers with Spectrum Analyzers for installation and maintenance of wireless networks. They feature the highest performance and the most capabilities ever offered by Anritsu in a compact handheld tester since introducing its first line sweeper in 1995. Cable and Antenna Analyzer Highlights Measurements: RL, VSWR, Cable Loss, DTF, Phase 2-port Transmission Measurement: High/Low Power Sweep Speed: 1 msec/data point, typical Display: Single or Dual Measurement Touchscreen Calibration: OSL, InstaCal™ , and FlexCal™ Bias Tee: 32 V internal   The wireless communications market continues to evolve at a rapid pace. Operators and service providers have to maintain old networks while upgrading to the new 3G and 4G networks so as to keep up with changing consumer demands. They face the additional challenge of needing to ensure their networks are competitive from a reliability, quality, and cost perspective. As a result of all this, they expect more of the contractors and technicians who maintain their networks. To stay competitive, these contractors and technicians must maintain more base stations than before and complete a wide variety of tasks in the shortest time possible. Anritsu is pleased to introduce its eighth-generation compact handheld Site Master cable and antenna analyzer series with integrated spectrum analyzer. The new Site Master analyzers offer the same ease of use, ruggedness, and familiar menus as its predecessor S331D and S332D. In addition, Anritsu has enhanced the Site Master to address all the customer requirements and suggestions received over the years. Indeed, for more than 14 years, Anritsu’s Site Master has been the de facto standard for contractors, installers, and wireless service providers who need a portable and rugged cable and antenna analyzer. The Site Master reduces per site maintenance expense, maximizes system up-time, and breaks away from the traditional fix-after-failure maintenance mode by finding small problems before major failures occur. Radio frequency (RF) engineers and field technicians in the U.S. Navy, U.S. Air Force, and other global defense programs responsible for installing and maintaining communication systems use Site Master’s frequency domain reflectrometry (FDR)-based approach to improve the quality of their communication systems. Although the new Site Master resides in a modern platform that takes advantage of the latest technologies and is loaded with features that will enhance productivity, it provides more value for better productivity without giving up the familiar look and feel. INTEGRATEDThe Site Master is a 4 or 6 GHz cable and antenna analyzer that can be configured to include either a 4 or 6 GHz spectrum analyzer, 2-port transmission measurement with built-in 32V bias tee, an interference analyzer with spectrogram displays, a channel scanner, power meter, high accuracy power meter, and GPS receiver for time and location stamping. Because of its multi-functional capabilities, it eliminates the need for you to carry and learn multiple instruments. TRUSTEDAnritsu builds upon its expertise in portable compact cable and antenna analyzers and spectrum analyzers. The Site Master is approved by all major operators and service providers worldwide. DESIGNED FOR FIELD USEThe Site Master was designed specifically for field environments. It weighs less than 6 lbs and its field replaceable Li-Ion battery typically lasts for more than 4 hours. A new bright 8.4-inch color display provides visibility even in broad daylight. With an operating temperature range from -10° to 55 °C, the Site Master will work in the most extreme weather conditions. The analyzer is almost impervious to the bumps and bangs typically encountered by portable field equipment, and its ruggedized case and splash proof design allow you to depend on high performance anywhere, anytime.   CONFIGURATION OVERVIEW Fucntion Description Cable and Antenna Analyzer, 2 MHz to 4 GHz Characterizes cable and antenna systems with return loss, cable loss, VSWR, distance-to-fault measurements. Also includes 1-port phase and Smith chart displays. Offers faster than 1 ms/data point sweep speed and a dual display. 2-port Transmission Measurement (Option 21) Provides high and low power settings for both TMA gain and antenna-antenna isolation measurements. Offers better than 80 dB dynamic range. Bias Tee (Option 10) Provides built-in 32 V bias tee that can be turned on as needed, and which eliminates the need to carry an external supply. High Accuracy Power Meter (Option 19) Connects high accuracy 6-, 8-, and 18 GHz USB power sensors with better than 0.16 dB accuracy.  Power Meter (Option 29) Makes channelized transmitter power measurements.  Interference Analyzer (Option 25) Includes the popular spectrogram display for monitoring intermittent signals over time. Channel Scanner (Option 27) Measures the power of multiple transmitted signals. CW Signal Generator (Option 28) Includes CW source to test low noise amplifiers, repeaters. (This requires an external CW generator kit.) GPS Receiver (Option 31) Provides location and UTC time information. Also improves the accuracy of the reference oscillator. Gated Sweep (Option 90) Views pulsed or burst signals such as WiMAX, GSM, and TD-SCDMAonly when they are on. AM/FM/PM Analyzer (Option 509) Analyze AM /FM/PM signals and measure FM/PM deviation, AM depth, SINAD, Total Harmonic Distortion and much more.    Master Cable & Antenna analysis, anywhere, anytime The majority of the problems you find at a typical cell site are caused by problematic cables, pinched cables, corroded connectors, antennas, lightning strikes, rain getting into cables, and bullet holes. Degraded cable systems and badly positioned antennas affect overall system coverage and eventually result in dropped calls. Site Master’s FDR-based return loss and DTF measurements can pinpoint an antenna problem from ground level in a few seconds, enabling Site Master to identify small problems before they become big problems. Return Loss / VSWRUse the Site Master to make return loss and VSWR and verify that the cable and antenna system conforms to performance specifications. Cable LossCable Loss metrics measure the level of insertion loss within the cable feedline system. This measurement can be verified prior to deployment, when you have access to both ends. Site Master automatically calculates the average cable loss. Distance-To-FaultWhile the return loss metric is the best measurement to verify the health of a system, distance-to-fault (DTF) is used to troubleshoot systems and locate the problem. The Site Master’s DTF measurement uses the fast Fourier transform to convert frequency data to the time domain and displays signal anomalies with respect to distance. Using the standard trace math feature, you can monitor small relative changes over time. 2-port Transmission Measurements (Option 21)Cellular/PCS and 3G base stations today use diplexers, duplexers, and tower-mounted amplifiers to extend the coverage area. Site Master’s 2-port transmission measurement enables you to make gain, isolation, and insertion loss measurements as well as verify sector-to-sector isolation. BIAS TEE (option 10)The built-in bias tee can be turned on as needed to place +12 to +32V on the center conductor of the RF in port, eliminating the need for you to carry external supplies in the field.   Enhance productivity with dual displays and instant calibration Dual DisplayThe dual display enables users to view two cable and antenna measurements on the same display. Because you can control the top and bottom displays independently, you can set markers and limit lines on each display. This results in significant time savings as there’s no need to make two measurements. Smith Chart and 1-port Phase DisplayThe cable and antenna analyzer also includes Smith chart and 1-port phase measurement displays for when you need to tune antennas and phase match cables. InstaCal™ CalibrationAlthough you need to get the job done as quickly as possible, you still need to make reliable and accurate measurements. Anritsu’s InstaCal module enables you to make accurate calibrations at the end of the phase stable cable without connecting a short/open/load. You only need to connect the InstaCal module once and everything is done automatically. This calibration method can cut the calibration time by as much as 50 percent and still deliver accurate calibrations. Directivity specification for the InstaCal module is 38 dB for the entire frequency range, allowing you to make fast and accurate measurements in no time—and with no in-between connections. Standard OSL CalibrationOpen-Short-Load (OSL) calibration comes standard with the Site Master. All errors from source match, directivity, and frequency response are mathematically removed, allowing you to make accurate vector-corrected measurements. Directivity is usually the main contributor to measurement uncertainty, and corrected directivity of 42 dB or better is common using Anritsu’s precision components. FlexCal™The Site Master’s FlexCal™ broadband calibration feature is an OSL-based calibration method that allows you to perform a broadband calibration and change the frequency range after calibration without having to recalibrate the instrument. RF ImmunitySite Master’s special dithering RF immunity solution enables you to make accurate cable and antenna measurements even in the presence of strong RF activity from co-located cell sites. Cable and Antenna Analyzer highlights Return loss, VSWR, cable loss, DTF 2-port transmission measurements with 32V bias tee 1-port phase, Smith chart Optical DTF measurements Dual display mode capabilities Built-in, editable signal standard and cable standard lists Calibration: OSL Cal, FlexCal, InstaCal 137, 275, 551, 1102, 2204 data points < 1 msec per datapoint sweep speed Trace overlay and trace math to monitor changes with reference traces Marker table with automatic peak/valley markers GPS tagging Limit lines and alarming for providing reference standards GPS tagging of data to verify location of tests Master Software Tools for post-analysis and report generation   Measurements       Measurements   VSWR       Return Loss       Cable Loss       Distance-to-Fault (DTF) Return Loss       Distance-to-Fault (DTF) VSWR       1-Port Phase       Smith Chart Setup Parameters     Measurement Display   Single/Dual Measurement Display with independent markers Frequency   Start/Stop, Signal Standard, Start Cal DTF   Start/Stop, DTF Aid, Units (m/ft), Cable Loss, Propagation Velocity, Cable, Windowing Windowing   Rectangular, Normal Side Lobe, Low Side Lobe, Minimum Side Lobe Amplitude   Top, Bottom, Auto Scale, Full Scale Sweep   Run/Hold, Single/Continuous, RF Immunity (High/Low), Data Points, Averaging/Smoothing, Output Power (High/Low) Data Points   137, 275, 551, 1102, 2204 Markers   Markers 1-6 (On/Off), Delta Makers 1-6 (On/Off), Marker to Peak/Valley, Marker Table Traces   Recall, Copy to Display Memory, No Trace Math, Trace ± Memory, Trace Overlay Limit Line   On/Off, Single Limit, Multi-segment (41), Limit Alarm, Clear Calibration   Start Cal, Cal Type (Standard/FlexCal™) Save/Recall   Setups, Measurements (.vna, .dat), Screen Shots Jpeg (save only) Application Options   Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other) Frequency       Frequency Range   2 MHz to 4 GHz Frequency Accuracy   ≤ ± 2.5 ppm @ 25 °C Frequency Resolution   1 kHz, (RF immunity low)100 kHz, (RF immunity high) Output Power         High   0 dBm, typical   Low   –30 dBm, typical Interference Immunity     On-Channel   +17 dBm @ > 1.0 MHz from carrier frequency On-Frequency   0 dBm within ± 10 kHz of the carrier frequency Measurement Speed       Return Loss   ≤ 1.00 msec/data point, RF immunity low, typical Distance-to-Fault   ≤ 1.25 msec/data point, RF immunity low, typical Return Loss         Measurement Range   0 to 60 dB   Resolution   0.01 dB VSWR         Measurement Range   1 to 65   Resolution   0.01 Cable Loss         Measurement Range   0 to 30 dB   Resolution   0.01 dB Distance-to-Fault         Vertical Range Return Loss   0 to 60 dB   Vertical Range VSWR   1 to 65   Fault Resolution (meters)   (1.5 x 108 x vp)/ΔF (vp = velocity propagation constant, ΔF is F2-F1 in Hz)   Horizontal Range (meters)   0 to (Data Points-1) x Fault Resolution, to a maximum of 1500 meters (4921 ft) 1-Port Phase         Measurement Range   –180° to +180°   Resolution   0.01° Smith Chart         Resolution   0.01 Measurement Accuracy       Corrected Directivity   > 42 dB, OSL Calibration       > 38 dB, InstaCal™ Calibration   For full Anritsu S331E product specifications, please click here: Anritsu S331E Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 2669 USD

Location: Southgate, Michigan

End Time: 2024-09-30T14:02:28.000Z

Shipping Cost: N/A USD

Product Images

Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21Anritsu Site Master S331E Cable & Antenna Analyzer SiteMaster w/ Options 10 & 21

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Brand: Anritsu

MPN: S331E

Model: Site Master S331E

Type: Cable or Antenna Analyzer

Recommended

Anritsu Offset Calibration kit 3-1010-119 Attenuator
Anritsu Offset Calibration kit 3-1010-119 Attenuator

$149.99

View Details
Anritsu MS2711D HandHeld Spectrum Master Analyzer w/ Option 3 Color MS2711
Anritsu MS2711D HandHeld Spectrum Master Analyzer w/ Option 3 Color MS2711

$999.00

View Details
Anritsu Semi-Rigid Coaxial Cable K120MM-40CM DC-40GHz 40cm K(m) - K(m) NEW
Anritsu Semi-Rigid Coaxial Cable K120MM-40CM DC-40GHz 40cm K(m) - K(m) NEW

$59.99

View Details
Anritsu S412E LMR Master Land Mobile Radio Modulation Analyzer
Anritsu S412E LMR Master Land Mobile Radio Modulation Analyzer

$14999.99

View Details
Anritsu MT8820C Radio Communication Analyzer Dual Output Options MT8820
Anritsu MT8820C Radio Communication Analyzer Dual Output Options MT8820

$799.99

View Details
One Anritsu MT8222A w/10 Opt. with new smart battery.12V 5A charger fully tested
One Anritsu MT8222A w/10 Opt. with new smart battery.12V 5A charger fully tested

$2475.00

View Details
Anritsu Site Master S251B Cable and Antenna Analyzer 625MHz-2500MHz
Anritsu Site Master S251B Cable and Antenna Analyzer 625MHz-2500MHz

$125.00

View Details
1pc Anritsu OSLN50-1 DC-6GHz N instrument calibration Tee
1pc Anritsu OSLN50-1 DC-6GHz N instrument calibration Tee

$248.00

View Details
Anritsu Semi-Rigid Coaxial Cable K120MM-25CM DC-40GHz 25cm K(m) - K(m) NEW
Anritsu Semi-Rigid Coaxial Cable K120MM-25CM DC-40GHz 25cm K(m) - K(m) NEW

$59.99

View Details
Anritsu S113B SiteMaster AntennaTester +Case Manual & Charger Will Not Power On
Anritsu S113B SiteMaster AntennaTester +Case Manual & Charger Will Not Power On

$129.90

View Details