Description: Evolution Gun Works (EGW) 1911 Colt Extractor Series 70 for 45acp Heavy Duty Evolution Gun Works Will not work with Schwartz style safety. Featured on gunmann.com The steel available to us today is of much higher quality than what was available in 1911 when the 1911 pistol was first produced. Improvements to the entire manufacturing process include better alloys, more controlled furnaces, vacuum heat treat, better tooling, and finite element analysis-all of which EGW uses in production. EGW-specific Improvements to the original 1911 Extractor: We found that the extractor rides up the relief groove on the ammunition casing with each round fired: this dulls the hook from constantly banging the case, over time tension is lost, leading to a jammed case which adversely affects accuracy. If you experience a loss of tension or must continually retension your extractor, it is time to replace it. We fixed all 3 of these problems by reducing the distance from the bolt face to the extractor hook. We found that most hook designs are cut straight at a right angle. We machined ours at an acute angle so that there is more surface area for the hook to bite into the case. Right angles are a weak point on other extractors so we put radii on both sides of ours to increase strength. The hook is machined with a special cutter that leaves a nice clean radius in the inside corner where most extractors fail. We found that the back section is normally thin and we machined ours to have a fully solid back further increasing the strength. We checked slides from 5 manufactures during development and they were all different in the back radius where the extractor is blended. In machining, we left the rear face slightly longer allowing space so that a Gunsmith can custom blend the extractor to your slide for a perfect fit Please note not all parts are "drop in". As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith. !!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!! No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm. All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues. If you have any questions or Issues, we are here to help. The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business. Thank you for your business-Dave Kravetz
Price: 39.99 USD
Location: Victor, New York
End Time: 2024-08-21T15:28:14.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Evolution Gun Works
For Gun Type: Handgun
Type: Slide & Firing Parts
Country/Region of Manufacture: United States
Features: Low Profile
For Gun Make: 1911
Gauge/Caliber: all
Material: Steel
California Prop 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Item Height: 10
Item Length: 7
Item Weight: 2
Item Width: 3
MPN: 10312
